I have a 1TB WD Elements External HDD.
I’ve been using it for over a year now, and since a month or so I’ve been getting a lot of errors.
Firstly, the copy speeds went down to 150KBps… I used to get at least 16.7MBps.
Secondly, the device was no longer being detected by computer.
I’ve tested the external hard drive on my home *Laptop and desktop PC.
Experienced the same problems, as listed below:
(1) WD’s Data Lifeguard Diagnostics: “Too many bad sectors detected” message, as seen in attachment
(2) Devices & Printers - “Elements 25A2” is detected