In the datasheet, it was mentioned that each of the “Write Throughput (max MiB/s, Seq 128KiB)” performance is 2120 MiB/s. How did you measure this throughput? Here’s what we got after testing:
- 1 DW/D: 500MB/s (with SAS)
- 3 DW/D: 1000MB/s (with SAS)
Can I know how you tested and setup to get this performance? We are using Mini SAS HD interface with RAID controller to PCIe Gen3, but we are not able to get that performance at 2120MB/s that you have published.