Acronis WD SSD Clone software killing my disks

2 identical failures, 2 disks dead.

I tried to clone my WD HDD to a previously used SANDisk SSD after clearing it to a single partition. I used the automatic settings in Acronis True Image for WD. The process froze part way through, i.e. stopped with the clock no longer counting down and no sign of disk activity. I used the “Cancel” button and the program exited except it seemed that perhaps it didn’t as I was notified that it was in the way and had to force a system restart. The SSD was now useless, although disk manager could see it existed it refused to initlaise it (“A device which does not exist was specified”) and it is the same “dead” disk wherever I plug it in, different computer, USB attached or SATA attached.

Then I repeated the whole process using an old WD HDD as a trial; I did not want to damage a new SSD. I got an identical failure and a second dead disk.

I found one article from some years back that suggested to do the process in a different system so that it was not the operating disk being cloned. I don’t really have that option.

Are my disks really dead and is this the official WD process for using their SANDisks cos it doesn’t work for me.

2 replies