Hi, I recently bought a 500 GB WD Blue ssd. So I downloaded WD ssd dashboard and wanted to make sure my ssd is ok before migrating OS from my old hdd. I did a quick and extended test. everything seems ok in the main panel. Normal and 100 percent life remaining. The only thing that worries me is the SMART diagnostic results.
It says the drive has a maximum number of 420 bad blocks and 24 bad blocks per die. Also after 3 to 4 days of regular usage (migrating the OS, Installing a few software packages, etc.) the wearout amount shown in the SMART diagnostic is around 0.2 percent! This is a pretty high number of bad blocks and wearout rate for a brand new drive right out of the box. If my drive wears out at this rate, in less than a year it needs to be replaced 🙂 Is this normal? Should I go for a replacement or refund immediately while the drive is still under warranty? Unfortunately the manual and support are pretty vague on this issue. All my hdds have been from WD and I have been always happy with their performance and durability. But to be honest I’m very disappointed with this new ssd if it is going to wearout so quickly, One more question: should I leave some free space on drive (lets say around 20 percent unallocated) for drive performance as it used to be the rule for ssds or WD ssds don’t need this extra over provisioning? I read somewhere that modern ssds already have some reserved over provisioned space and can be used to full capacity. Please clarify these two issues.
 Important questions about WD blue ssd
5 replies