Not showing in BIOS WD Blue SN550 1TB M.2 Pcie NVMe SSD >

Hi

I don’t have a strong technical background so require a bit of help.

I’ve installed a 1TB WD Blue SN550 M 2 Pcie on my Gigabyte B450 ds3h F50 BIOS version. The BIOS is set to optimised defaults… The M.2 is recognised in Windows 10 and l have allocated the drive. However, in the BIOS it shows under Peripherals NVMe configuration but l cannot see the drive under Boot Option Priorities.

My intention is to clone my OS to the M.2 then assign it as Boot Option #1 and use it as my primary drive. My two other drives are a Kingston 120gb SSD and a WD 1TB HDD. The OS is on the SSD.

Can anyone give any advice on what l need to do?

Thanks

4 replies