Hello everyone
I am using a WD BLUE SN 580 nvme…
I recently formatted the nvme with lbaf=1 using nvme cli but when I started writing data to it, it showed some error in dmesg and the nvme became inaccessible …
Reverting to 512b sector size works fine but the error occurs again after changing to 4096b size…
Its also using latest firmware
The error:
[28922.642400] nvme nvme0: controller is down; will reset: CSTS=0xffffffff, PCI_STATUS=0x10
[28922.714515] nvme 0000:01:00.0: enabling device (0000 → 0002)
[28922.715277] nvme nvme0: Removing after probe failure status: -19
And also many btrfs io errors
And then the nvme is inaccessible until reboot
Any fix ?
EDIT : The error typed here is copied from another forum but I got the same error