I have Samsung 840 EVO 120 GB as system drive c: and 1 TB Samsung Spinpoint 7200 rpm HDD as D: drive.
I am using Samsung 840 EVO in rapid mode (Rapid mode uses slice of RAM as very fast cache) and drive c is already really fast.
Where I need ReadyCache is mostly to accelerate drive d: HDD, it is not necessarily to accelerete c: drive which is already fast enough.
I read Ready´Cache install manual and there is no way to determinate which drive is accelerated.
Can I install ReadyCache drive and software despite I already have SSD as c: drive and does ReadyCache skip c: drive acceleration and focus on only accelerating mechanical d: drive ?
Or is it impossible use ReadyCache at all in my configuration ?
Will there be conflict with Samsung Rapid mode acceleration if I install ReadyCache drive to my system ?
Other option would be using Sandisk 32 GB drive in Intel ISRT mode where you can choose option which drive is accelerated.
Only problem is that my Windows 8.1 is installed in AHCI mode and ISRT requires RAID mode to work and I am not sure if TRIM works in RAID mode at all.
My motherboard is Asus P8Z68V Pro.
If I install ReadyCache in AHCI mode (current) my configuration would be Samsung SSD + Sandisk readyCache + Samsung Spinpoint HDD.
Does ReadyCache software automatically detect that drive c: is already SSD and it wont cache it all ?
Many question, I already than you for good answers