Sandisk SATA SSD Plus 240GB Smart values

I bought a Sandisk SATA SSD Plus 240GB as a mirror for my Debian boot drive - I ordered it on 16 October, installed it on 20 October and it has been powered up almost continuously since then. I just ran a short test and here is the smartctl -aoutput:

smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.15-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Marvell based SanDisk SSDs
Device Model:     SanDisk SSD PLUS 240GB
Serial Number:    25243H804812
LU WWN Device Id: 5 001b44 8c8e7da6d
Firmware Version: 42077100
User Capacity:    240,057,409,536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic
Device is:        In smartctl database 7.3/5894
ATA Version is:   ACS-4, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Nov  7 22:59:32 2025 WET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 246) Self-test routine in progress...
                                        60% of test remaining.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x71) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  10) minutes.
Conveyance self-test routine
recommended polling time:        (   1) minutes.

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   010    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       21
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       8
165 Total_Write/Erase_Count 0x0032   100   100   000    Old_age   Always       -       8590852108
166 Min_W/E_Cycle           0x0032   100   100   000    Old_age   Always       -       0
167 Min_Bad_Block/Die       0x0032   100   100   000    Old_age   Always       -       15
168 Maximum_Erase_Cycle     0x0032   100   100   000    Old_age   Always       -       1
169 Total_Bad_Block         0x0032   100   100   000    Old_age   Always       -       53
170 Unknown_Marvell_Attr    0x0032   100   100   000    Old_age   Always       -       0
171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
173 Avg_Write/Erase_Count   0x0032   100   100   005    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   097    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   100   100   014    Old_age   Always       -       31 (Min/Max 23/39)
199 SATA_CRC_Error          0x0032   100   100   000    Old_age   Always       -       0
230 Perc_Write/Erase_Count  0x0032   100   100   000    Old_age   Always       -       1 0 1
232 Perc_Avail_Resrvd_Space 0x0033   100   100   004    Pre-fail  Always       -       100
233 Total_NAND_Writes_GiB   0x0032   100   100   000    Old_age   Always       -       50
234 Perc_Write/Erase_Ct_BC  0x0032   100   100   000    Old_age   Always       -       77
241 Total_Writes_GiB        0x0030   253   253   000    Old_age   Offline      -       53
242 Total_Reads_GiB         0x0030   253   253   000    Old_age   Offline      -       23
244 Thermal_Throttle        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        21         -

This drive has been running for about 2 weeks now and NOT 21 hours.

What could be happening here?

4 replies