Solid State Drives (SSDs) are the standard for quick and reliable storage.
Drive Type
Use the correct drive for the intended purpose.
Need more help?
Learn and compare SSD
Enable TRIM
TRIM helps maintain the fast speed of the SSD.
- Windows: TRIM is enabled by default.
- macOS: TRIM is enabled by default on most SSDs.
Need more help?
- Learn About TRIM, UAS Support for USB Flash, Memory Cards, and SSD on Windows and macOS
- Download, Install, Test Drive, and Update Firmware Using SANDISK Dashboard
Update Firmware
Firmware can improve performance.
Need more help?
Download, Install, Test Drive, and Update Firmware Using SANDISK Dashboard
Avoid Drive Writes
SSDs have a limited number of writes.
It's a good idea to avoid them.
Hibernation writes RAM content to the drive.
This can be changed on Windows by running Command Prompt as an administrator and typing:
- powercfg -h off to disable
- powercfg -h on to enable
Monitor Health
Use SANDISK Dashboard to monitor the drive's SMART (Self-Monitoring, Analysis, and Reporting Technology).
Need more help?
Download, Install, Test Drive, and Update Firmware Using SANDISK Dashboard
Optimize OS Settings
Adjust or disable indexing.
Indexing can increase the number of writes to the drive.
Consider disabling indexing if Search is not used often.
This can be changed on Windows by running Command Prompt as an administrator and typing:
- sc stop "wsearch" && sc config "wsearch" start=disabled to disable
- sc config "wsearch" start=delayed-auto && sc start "wsearch" to enable
Maintain Free Space
SSDs perform better when they have plenty of free space.
Try to keep at least 10-15% free space at all times.
Windows Write Caching
Some drives need this turned on to get the best results.
This improves speeds by collecting commands sent to the drive.
Important:
Loss of data can occur when Write Caching is turned on.
It can happen during data transfer if there is a sudden loss of power or hard shutdown of the computer.
Need more help?
Microsoft Article: Tips to improve PC performance in Windows.
Turn on write caching.
- Right-click on Start Menu.
Click Device Manager. - Expand Disk Drives.
Right-click the drive.
Click Properties. - Click Policies.
Click Enable write caching on the device.
Click OK.
Sandisk Support article 51745. View the original article on Sandisk Support