Supported Operating Systems
- Windows 11
- Windows 10 32-bit & 64-bit
- macOS is not supported
Steps to Format
- Download and Install Sandisk Full Format and Refresher.
 - Connect the card reader to USB 3.0 port.
 - Insert the CFast Card into the reader.
 - Open the Full Format and Refresher.
 - Make sure all the check marks are green.
Click Full Format.Warning: This process erases all data on the device. Back up your data before you continue.
 - Click Yes.
Important:
-
The duration of the process will vary based on the size of the card.
-
Let the process finish before removing the card. The card might not work and need to be formatted again if the process is interrupted or removed early.
Â
-
- Click OK.
 - Safe Eject and remove the card reader.
Need more help?
Steps to Safe Eject and Remove USB Flash and External Drives on Windows or macOS
Sandisk Support article 51142. View the original article on Sandisk Support