About SATA
SATA (Serial Advanced Technology Attachment) is hardware used to connect SSDs to a motherboard.
There are differences between SATA versions.
SATA I
- 1st gen or SATA 1.5Gb/s
- Support up to 150 MB/s
SATA II
- 2nd gen or SATA 3Gb/s
- Support up to 300 MB/s
- Compatible on SATA I ports.
- * The max speed of the drive will be lower due to the limitation of the port.
SATA III
- 3rd gen or SATA 6Gb/s
- Support up to 600 MB/s
- Compatible on SATA II and SATA I ports.
- * The max speed of the drive will be lower due to the limitation of the port.
* Example:
Sandisk Extreme SSD supports SATA 6Gb/s.
It can reach up to 550/520MB/s sequential read/write speeds connected to a SATA 6Gb/s port.
However, it can only reach up to 285/275MB/s connected to a SATA II 3Gb/s port.
Sandisk Support article 39468. View the original article on Sandisk Support