About RAID
RAID can be rebuilt by putting a new drive into the SHUTTLE SSD without losing the data.
Critical:
RAID 0 cannot be rebuilt.
Make sure the unit is turned off before removing the faulty drive, and inserting the new drive.
Disconnect any other SHUTTLE devices before initiating the rebuild.
Sandisk does not support and cannot help with non-compatible drives.
Need more help?
Steps to Rebuild
Download and install G-RAID Software Utility.
- G-RAID Software Utility for macOS
- G-RAID Software Utility for Windows
Need more help?
Steps to Download and Install G-RAID Software Utility for G-RAID, G-SPEED SHUTTLE SSD
- Unlock the G-RAID Software Utility by clicking the padlock.
- Click Physical Drive.
Note:
The new drive will show as Unconfigured.
- Click Disk Array.
Mouse over the three dots on the right.
Click Rebuild.
- Click Confirm.
Disk Array will show Rebuild was started successfully.
- Click Background Activities to view status of the rebuild.
Critical:
DO NOT disconnect, reboot, power off, let the computer go to sleep or stand-by mode.
The rebuild will take about 2 hours per 1TB of capacity.
SHUTTLE WILL mount on the desktop during this time.
DO NOT use the device until the rebuild has completed.
Sandisk Support article 34619. View the original article on Sandisk Support