Imagemate PRO Reader Quick Start Guide

Minimum Requirements

  • Storage Only: Windows®XP, MacOS® X 10.5+ and higher
  • Sandisk CompactFlash, SD, or microSD card
  • USB 2.0 port


Reader LED Status

StateLED StatusPowered OnRedPowered OffNo LightAccessing Data (Read/Write)Blinking White


Getting Started

  1. Insert the micro-USB cable into the reader.

  2. Insert the USB-A connector side into the USB port of the computer.
    It should automatically detect the reader.

  3. Gently insert a memory card into the specified slot.
    Double-Click Removable Disk in Microsoft Explorer or macOS Finder to open and manage files.

  4. Select files from the card.
    Copy to the desired location on the computer.


Removing Cards

Remove the memory card from the reader.

  • CF and SD Cards:
    Firmly pull the card out of the slot.
    Ensure to keep card aligned with the slot to avoid damage.

  • microSD Card:
    Gently push the card in further.
    The card will spring out.
    Pull the card out of the slot.


Remove Reader

Safe Eject the reader from the computer.

Need more help?
Steps to Safe Eject and Remove USB Flash and External Drives on Windows or macOS


Critical:

  • DO NOT remove memory cards during read/write operations.
    This can cause data corruption.

  • Unplug the reader and plug in again to reset the device if any error occurs at any time.



Data Recovery Service


Sandisk Support article 47119. View the original article on Sandisk Support