ImageMate Reader (SDDR-289) Firmware Updater for macOS

Legacy OS Support

Important:

It is ONLY compatible with macOS OS 10.7, 10.8 and 10.9.

Sandisk does not provide support for products used with vendor end of life operating systems.
Upgrade older computers to an Apple supported operating system.


Need more help?
Apple macOS End of Support

Steps for macOS

  1. Download the firmware updater.


  2. Disconnect and Remove all USB drives and memory cards.

  3. Double-click to install.
    Click Continue.
    Click Install.

  4. Enter the macOS username and password.
    Click Install.

  5. Connect the SDDR-289 reader to the computer.

  6. Search for SDDR-289 in Spotlight.
    Run the updater.


  7. Click Update.
    Wait until it completes.





    Note:

    It may take the touchpad 5-10 seconds to respond.


  8. Click Quit.

    Critical:

    No USB device will be recognized if "Sandisk SDDR-289 USB3.0 Card Reader" software is not used.




  9. Reboot macOS.

Sandisk Support article 42214. View the original article on Sandisk Support