Resolve Cannot Find USB Flash, External Drive, Card Readers, or Internal Drives on Windows or macOS
Problem
The internal drive is not seen in a third-party or enclosure.
Solution
Check Compatibility
- Make sure the drives are compatible with the .
Check your vendors list if not listed below.
- Power cycle the NAS.
- Ensure the drives are firmly seated into the drive slots.
- Move the drive into a different drive bay or empty slot.
Critical:
Moving drives around in an active RAID can potentially corrupt data.
Power OFF and NAS before moving drives. - Check the NAS for driver and firmware updates.
- Insert the drive into a desktop computer using a SATA cable.
Use a Powered SATA to USB docking station if a laptop is used.
Note:
The USB Port of a laptop may not provide enough power for a 3.5" drive when using a non-powered SATA to USB Cable. A docking station or connector can cause problems with drive detection and testing. - Test the drives for errors.
Need more help?
Steps to Check Drives and Memory Cards for Errors or Failures on Windows and macOS
Drive Test OK?
Contact the NAS vendor for support and help.
Drive Test NOT OK?
Replace the drive if in Warranty.
Need more help?
Steps to Get a Sandisk Warranty Replacement for a Product, Power Supply, or USB Cable
Data Recovery Service
Sandisk Support article 51456. View the original article on Sandisk Support