About Readiness
G-DRIVE PRO STUDIO SSD can handle writes up to 11,000 terabytes of data.
It can take 30 to 45 seconds to start up and be ready for use.
Best Practice Steps
- Power on the computer.
- Connect the power cable to the G-DRIVE.
- Connect the cable to a wall outlet.
- Plug the Thunderbolt 3 cable into the drive.
- Plug the cable into the computer.
- Power on the drive.
Note:
The drive icon will mount on the desktop.
- Wait 30-45 seconds before using the drive.
Sandisk Support article 34287. View the original article on Sandisk Support