Learn About G-RAID SHUTTLE SSD LED Behavior

Problem

Red LED on the G-RAID SHUTTLE

  • Drive LED also Red = issue with the drive
  • Drive LED are all Blue = issue with chassis/enclosure

    Critical:

    There is a mute button that can silence the beep alarm.
    It is on the back next to an image of a speaker with a line through it.
    Take a and replace an in warranty chassis if the beep continues and muting does nothing.


Red LED on the Drive

  • Offline or Dead: drive is offline.
  • Degraded: is not fully redundant.
  • Failed: drive has a physical error.

Solution

G-RAID Software

  1. Download and install the G-RAID Software Utility.


  2. Open the G-RAID Software Utility.
    Click Physical Drive.

    • An Offline or Dead drive can be brought back online.

      Need more help?
      Steps to Resolve G-RAID, G-SPEED SHUTTLE SSD Drive is Dead or Offline.

    • A Degraded drive can be added back to the RAID array.
      Click the Background Activities tab.
      Click Rebuild.

      Note:

      The rebuild will take about 2 hours per 1TB of capacity.
      G-RAID SHUTTLE WILL mount on the desktop during this time.
      It is advised NOT to use the device until the rebuild has completed.

    • A Failed drive needs to be replaced.


Data Recovery

The drive may need to be replaced if it is not detected in Disk Management (Windows) or Disk Utility (macOS).

Need more help?



Warranty Replacement

The chassis, drive should be replaced if in warranty.

Need more help?
Steps to Get a Sandisk Warranty Replacement for a Product, Power Supply, or USB Cable


Data Recovery Service



Sandisk Support article 50644. View the original article on Sandisk Support