Learn About SATA vs NVMe SSD Differences

SATA SSDs are great for most common tasks.
NVMe offer faster data transfer speeds and response times.


Use Case

SATA

  • Great for web browsing, office programs, and watching videos.

NVMe

  • Best for gaming, video edits, and analyzing data.


Performance

SATA

  • Limited to SATA III top speed of 6 Gbits/s (600 MB/s).
  • Actual speed is much lower than 6 Gbits/s (600 MB/s).

NVMe

  • Performs at much faster speeds.
  • Can reach up to 3500 MB/s on PCIe Gen 3.0.
  • Allows for faster boot times, data transfer and overall performance.


Interface and Protocol

SATA

  • Designed for older, slower hard drives and changed to work with SSD.
  • Uses the AHCI system which is made for slower hard drives.
    Using AHCI on SSD does not let them run as fast as they could.


NVMe

  • A new system built for SSD.
  • Uses the PCIe bus in computers.
  • Faster because it's made for quick memory, can move data faster with less delay compared to SATA.


Form Factor

SATA

  • Often have the same size as old laptop hard drives (2.5 inches) and use a SATA cable to connect.
  • Can use M.2 but much less common.


NVMe

  • Often uses the M.2 form factor which is a small card-like slot on the motherboard.
  • Some NVMe use the U.2 form factor.
    U.2 is more common on enterprise setups.



Sandisk Support article 51423. View the original article on Sandisk Support