Learn About the Temperature Sound Alert Beep for G-RAID, G-SPEED SHUTTLE SSD

Problem

Front to back airflow along with the use of Smart Fans help keep the internal drives cool.
An alert beep will sound when the:

  • Temperature goes above 60°C.
  • Fans can no longer cool the system as needed.
  • Main cooling fans fail.

Solution

Critical:

There is a mute button that can silence the alarm.
It is on the back next to an image of a speaker with a line through it.
Take a and replace an in warranty chassis if the beep continues and muting does nothing.


Environment

  • Make sure nothing is blocking the front or back.
  • Provide, at least, three inches of space between any other objects.

Use compressed air to clear dust buildup by using these steps.

  1. Open the front door.

  2. Blow dust from front to back.

  3. Blow between each of the drives and throughout the chassis.

Important:


Write down the slot order of the drive if it is removed before clearing dust.
Drives need to be placed back into the same slot order to keep data integrity.


Verify Temperature

  1. Download and install the G-RAID Software Utility.


  2. Open the Utility.

  3. Click Fan.


  4. Review the Temperature Sensors section.



Warranty Replacement

The chassis can be replaced if it is under warranty.

Need more help?
Steps to Get a Sandisk Warranty Replacement for a Product, Power Supply, or USB Cable


Sandisk Support article 34993. View the original article on Sandisk Support