Learn About USB Flash Drive Temperatures During Use

About Testing

Testing Standards

USB drives follow the Safety of Information Technology Equipment (IEC 62368-1) standard.
The United States, Canada, Europe, Australia, and New Zealand use it.

Temperature Testing

USB drives are tested in normal ambient temperature ranges 0º C to 25º C.
They are also tested with host between 25º to 45º C.


Metal USB Drives

Metal absorbs more heat than plastic.

Metal releases heat faster when touched.
It may feel hotter compared to drives made from plastic being used in the same way.
The Sandisk iXpand, Ultra Fit USB, Ultra Flair USB, Ultra USB Type-C, Cruzer Force, and Sandisk Extreme PRO drives use more metal than other Sandisk USB drives.


Important:

Wait 30-60 seconds after data transfer.
Allow the drive to cool down before ejecting and removing.


Need more help?
Sandisk Article: Compare USB Flash Drives


Causes of High Temps


High Powered Ports

Drives can get hot when plugged into Active Hubs, Thunderbolt, and Charging ports.

They negotiate up to 100W that must be managed by the drive.
More heat is created as the drive works harder to handle the extra power.
These ports also keep the drive awake during higher speeds which uses more power than older USB ports.


Host Device and Air Temperature

Hosts (computer, drone, camera, phone, tablet) can operate at ranges from 25 º C to 45º C.

The outside of the drive works as a cooling surface.
Heat is transferred from inside the drive to the cooler air outside.
Heat transfer will not work well if the host device or ambient air temperature is high.
It is normal for the drive to be warmer than it would be if the host or air was cooler.



Data Transfer and Extended Use

Transferring large or lots of files can increase the temp of the drive.

Large files take longer to complete.
They need more energy than small files.
Multiple file transfers that are completed over a short period of time work the same as large files.
The inside temp of the drive will go up.
The drive will release more heat through the cover in order to complete the data transfer.




Sandisk Support article 46290. View the original article on Sandisk Support