Learn About Using Windows CHKDSK on an Internal SSD

About CHKDSK

Using Windows CHKDSK will not harm an SSD in the same way that DEFRAG will.
The two utilities perform differently on an SSD.
Solid State Drives have wear-leveling and error correction built in.

Differences

CHKDSK

  • CHKDSK is read-intensive.
    It reads or scans the drive for errors.
    It can detect and correct errors using a small write operation that does not affect the NAND in the same way that 'defrag' does.

  • CHKDSK or S.M.A.R.T. cannot detect if an SSD controller is failed or not.


DEFRAG

  • DEFRAG is write-intensive.
    Data is moved and re-written some place else on the NAND (flash memory).
    It can cause early wear and degrade the NAND on the SSD.
    Trying to defrag an SSD is not needed because Solid State Drives use smarter technology than Hard Disk Drives.



The SANDISK Dashboard can be used to check the health of Internal SSD.

Need more help?
Download, Install, Test Drive, and Update Firmware Using SANDISK Dashboard


Sandisk Support article 49188. View the original article on Sandisk Support