Problem
The drive is not getting the max stated speed.
The up to speeds show only when attached to a host motherboard with PCIe Gen 5 NVMe M.2 slots.
Check the motherboard manufacturer website or documentation to ensure compatibility.
Motherboard NVMe Speeds
- PCIe Gen5 capable drive attached to the computer.
- Shows as attached to a PCIe Gen3 slot.
Solution
Host Device
Make sure the latest BIOS, NVMe, drivers, and firmware are installed on the host.
Older and incompatible versions can result in low performance or non-detection of the drive.
The host must support PCIe Gen 5 NVMe M.2 to get the max stated speed.
Enable Windows Write Caching
Important:
Loss of data can occur when Write Caching is turned on.
It can happen during data transfer if there is a sudden loss of power or hard shutdown of the computer.
Turn on write caching.
- Right-click on Start Menu.
Click Device Manager. - Expand Disk Drives.
Right-click the drive.
Click Properties.
 - Click Policies.
Click Better performance.
Click Enable write caching on the device.
Click OK.
Need more help?
Microsoft Article: Tips to improve PC performance in Windows.
Sandisk Support article 52910. View the original article on Sandisk Support