Problem
Request failed due to a fatal device hardware error is seen.
This happens with the OS cannot read/write to the drive.
Error messages could be:
- X: is not accessible. The request failed due to a fatal device hardware error.
- Error 0x800701E3: The request failed due to a fatal device hardware error.
- Virtual Disk Manager: The request failed due to a fatal device hardware error.
It can be caused by:
- Failing USB cable.
- Loose USB connections.
- Computer hardware fault.
- Drive sector errors.
- Drive hardware failure.
Solution
Steps to Resolve
- Check the USB cable.
Replace the USB cable with a new one. - Check the USB connection.
Safe Eject and remove the USB cable from the drive and the computer.
Reconnect and ensure all connections are secure, tight and not loose.
Try a different USB port and cable. - Change the drive letter.
Need more help?
Steps to Change a Drive Letter in Windows. - Check the drive for errors and repair.
Need more help?
Steps to Check Drives and Memory Cards for Errors or Failures on Windows and macOS. - Format the drive.
Need more help?
Steps to Format a Drive for Use with Windows or macOS.
Failed or Damaged Drive Warranty Replacement
Replace a failed or damaged drive under warranty.
Need more help?
Steps to Get a Sandisk Warranty Replacement for a Product, Power Supply, or USB Cable
Self Help Third-Party Data Recovery
Need more help?
- Self Help Third-Party Data Recovery Software for Windows and macOS
- Sandisk RescuePRO® and RescuePRO® Deluxe (for Windows and macOS)
Data Recovery Service
Sandisk Support article 50556. View the original article on Sandisk Support