Learn Why a Drive Cannot Boot from the Primary Partition

Problem

The drive cannot boot from the primary partition.
It must be Active to boot from it.

Note:

Only the primary partition on the master drive can be set to Active.

Solution

View the partition and change to Active.

  1. Boot the system with a Windows startup disk.
    Type FDISK at the A:\ prompt.
    Press ENTER.

    A message Warning - No active partitions set will show if none are active.

  2. Select 2 Set Active Partition.
    Select Partition 1 when asked.

Sandisk Support article 2119. View the original article on Sandisk Support