Problem
A drives health or lifespan can degrade faster than normal due to:
- dropping the drive.
- vibrations.
- operating in high temperatures.
- heavy write operations.
- using as swap space.
- software that uses defragmentation.
Solution
SSD Best Practices
Use these best practices for the SSD.
Need more help?
Best Practices for Optimizing an SSD
Drive Handling
Special handling is needed to protect the drive from damage.
Need more help?
- Learn How to Handle Internal Solid State Drives (SSD)
- Learn How to Store Memory Cards, Internal, and External Drives When Not in Use
Vibrations
Make sure the drive is seated into the slot securely.
Do not overtighten but do not leave the M.2 slot screw too loose.
A torque range of 0.45 to 0.67 Nm is a common guideline for securing M.2 drives.
Check the motherboard vendor torque spec requirements.
High Temperatures
Keep the drive inside of its temp specs.
Need more help?
Consequences of Using Solid State Drives Outside of Temperature Specifications
Heavy Write Operations
Solid State Drives have a limited number of write, erase cycles.
Memory cells have a slight wear down with every write operation.
Need more help?
- Learn About SSD Endurance and Wear Information
- Steps to Check Remaining Life and Endurance of an Internal SSD
Swap Space
Swap Space is write-intensive.
It will cause early wear and degrade the NAND on the SSD.
Fragmentation
DEFRAG is write-intensive.
Data is moved and re-written some place else on the NAND (flash memory).
It will cause early wear and degrade the NAND on the SSD.
Need more help?
- Learn About TRIM, UAS Support for USB Flash, Memory Cards, and SSD on Windows and macOS
- Download, Install, Test Drive, and Update Firmware Using SANDISK Dashboard
Sandisk Support article 53001. View the original article on Sandisk Support