Problem
Windows can see the drive.
The Dashboard software sees it incorrectly or not at all.
Reset to device, \Device\RaidPort Events in Event Viewer.
The storage driver being used may be corrupted or not compatible.
Solution
Use stornvme Standard NVM Express Controller (Recommended) or nvmedisk Native NVMe. They are the standard and updated NVMe drivers provided by Microsoft.
Storage Driver Check
Check which storage driver is being used.
- Right-click the Start Menu.
Click Device Manager. - Expand Disk drives.
Click the drive. - Click View.
Click Devices by connection.
Important:
It will need to be changed if it does not say Standard NVM Express Controller.
Manually Update NVMe Controller Driver
- Right-click the NVMe controller.
Click Update Driver. - Click Browse my computer for drivers.
- Click Let me pick from a list of available drivers on my computer.
Look for Standard NVM Express Controller.
Click Have Disk if not listed. - Click Browse.
Go to C:\Windows\INF.
Locate stornvme.inf (Recommended) or nvmedisk.inf.
Click Open.
Click OK. - Select Standard NVM Express Controller or Native NVMe driver.
Click Next.
Click Close.
Restart computer.
The drive should now be seen properly in SANDISK Dashboard.
Sandisk Support article 51251. View the original article on Sandisk Support