About Codes
Get the product code or serial number of a drive for warranty replacement.
Note:
USB Flash and Memory cards do not have serial numbers that are viewable in Windows.
The SN of NVMe drives will not show in Windows WMIC or macOS System Information.
WMIC and System Information will show the bridge board controller number.
Windows
WMIC Command (Internal SATA Drives)
WMIC can be used on internal SATA drives.
It cannot be used to get the product serial number of an NVME or external drive.
- Right-click the Start button.
Select Command Prompt (Admin). - Type wmic diskdrive get interfacetype, model, name, serialnumber.
Press the Enter key on the keyboard.
SANDISK Dashboard (Supported Drives)
It can be used on supported internal drives.
It cannot be used to get the product serial number of an external drive.
Need more help?
Download, Install, Test Drive, and Update Firmware Using SANDISK Dashboard
Supported Drives
- Download and install SANDISK Dashboard.
Need more help?
Download, Install, Test Drive, and Update Firmware Using SANDISK Dashboard - Open it.
- Select the drive.
Click Tools
Click DEVICE DETAILS.
macOS
System Information (Internal SATA Drives)
It can be used on internal SATA drives.
Important:
macOS System Information cannot be used to get the serial number of external drives.
- Type System information in the Spotlight Search bar.
- Select Hardware.
- Find and Select the drive.
View the product code and serial number.
Sandisk Support article 21600. View the original article on Sandisk Support