Problem
External drives that get power through the USB port may not be accessible after the computer wakes up. Files and folders may not be seen until it is rebooted.
There may not be enough power to the USB port after sleep or standby mode.
Larger capacity drives may need more power for a longer period.
Solution
WD_BLACK P50 Game Drive SSD
It is designed for gaming and continuous use.
The computer must be powered on and not allowed to go into sleep or standby mode.
Power Off the computer when not in use or safe eject the drive and disconnect.
Need more help?
Instructions to Prevent an External Drive from Going Into Sleep or Standby Mode on Windows and macOS
USB Hub Power Saver
Turn off Allow the computer to turn off this device to save power.
- Open Computer or Device Manager.
Need more help?
How to Open Device Manager on Windows
- Select Device Manager.
Expand USB Serial Bus Controllers.
Right-click USB Root Hub.
- Click Properties.
- Click Power Management.
Uncheck the box next to Allow the computer to turn off this device to save power.
Click OK.
- Repeat for all USB Hubs.
- Restart Windows.
Undo the changes if the drive still cannot be seen after waking from sleep mode.
- Check the box Allow the computer to turn off this device to save power.
- Click OK.
- Repeat for all USB Hubs.
- Restart Windows.
USB Port Power
- Try a different USB port.
- Use a powered USB hub or docking station.
Sandisk Support article 21348. View the original article on Sandisk Support