Problem
The drive does not boot.
No clone errors happened.
This can be caused by:
- USB drive is not bootable.
- Incorrect boot drive cloning steps used.
- Windows BitLocker is turned on and locked.
- New drive is connected to the computer with a USB cable.
- Disk cloning process failure.
- System Files missing or corrupted.
- Original drive has errors or bad sectors.
- New drive has errors or bad sectors.
Solution
- Use a bootable USB flash drive.
It must show as USB Device and not SCSI Disk Device in Windows.
Need more help?
Learn About Bootable and Non-Bootable Sandisk USB Flash Drives - Use the right clone steps for boot drives.
Acronis Rescue Media must be used.
Need more help? - Unlock the drive if BitLocker is used.
Need more help?
Cloning a Windows BitLocker Drive Fails with Acronis True Image for Sandisk - Delete data from the drive that is no longer needed.
- Check the original and new drive for errors.
Need more help?
Steps to Check Drives and Memory Cards for Errors or Failures on Windows and macOS - Make sure the new drive is seen by the BIOS and motherboard.
- Make sure the computer BIOS is up to date.
- Update Windows or macOS.
- Create a Windows Recovery Disk before cloning.
Need more help?
Microsoft Article: Create a recovery drive - Clone the drive with Acronis Rescue Media.
Need more help?
Steps to Collect Acronis True Image for Sandisk System Report on Windows and macOS - Get the Acronis Logs.
Need more help? - Check the logs for errors.
Need more help?
Acronis Article: Finding and Analyzing Logs
Sandisk Support article 50415. View the original article on Sandisk Support