Problem
Backup, Copy, Move, or Restore Failed. Something went wrong, please try again is seen.
This can be caused by:
- Files not supported or damaged.
- Drive not seen by computer.
- Volume not mounted and seen in File Explorer or Finder.
- Drive in read-only (Write Protected) mode.
- Corrupted file system.
- Drive failure.
Solution
Check Drive
- Make sure the drive is seen in Windows Disk Manager or macOS Disk Utility.
Need more help? - Unlock the drive if password protected.
Need more help?
SANDISK App Backup, Password, and Encryption User Guide Instructions for Windows and macOS - Test read and write to the drive.
Manually copy a file to the drive.
Copy a file from the drive. - Check the drive for errors.
Need more help?
New Backup Folder
Create a new backup folder.
- Close and exit SANDISK App.
- Access the drive in File Explorer or Finder.
- Rename the Backup folder to SANDISK Backup.OLD.
- Start a backup.
Need more help?
- Steps to Turn On Analytics, Share Device ID, and Collect SANDISK App Logs on Windows and macOS
- Sandisk Warranty Replacement and Data Recovery
Backup Objects
Check for the problem data by backing up one item at a time.
- Select the external drive.
- Click Manage Backup.
- Toggle Off Select All.
All objects should be unselected.
- Select a single object.
- Click Run Backup.
Wait for the backup to complete or error. - Unselect the object.
- Repeat Steps 4 to 7.
Do this for all remaining objects shown in the app.
Manual File Copy
Manually copy problem files and delete them from the computer.
Copy a couple of files at a time in batches to see which ones are causing problems.
- Open the app.
- Select the computer's drive.
- Select a batch of files.
DO NOT select all. - Click Copy.
- Select the external drive.
- Go into the destination folder of the external drive.
- Click Paste.
Keep the app in the foreground.
- Make sure all files selected are copied.
- Delete files from the computer if the Copy Completed.
- Repeat for the next batch of files.
Need more help?
Learn About Supported File Types and Cannot Be Previewed Message in SANDISK App
Sandisk Support article 53089. View the original article on Sandisk Support