Problem
A Firmware Update is available but download or install fails.
Solution
Manually download and install the firmware from the dashboard logs.
Note:
Booting into Safe Mode without networking may be needed to start SANDISK Dashboard and install firmware manually after getting the .fluf file.
Dashboard Steps
- Open SANDISK Dashboard.
- Click Help.
- Click GENERATE REPORT FILE.
Save the Dashboard_Report.zip file. - Open the .zip file that was saved.
- Double-click on the dashboard.log.
- Find a line that says:
Warning: -- Timed out download of... with a URL that ends in .fluf. - Copy the URL between the " " marks.
Paste into a web browser address bar.
Press Enter. - Open SANDISK Dashboard.
Click Tools. - Click SELECT FILE.
- Click PROCEED.
- Find and select the .fluf previously downloaded.
Click Open.
The firmware should now install to the drive.
Dashboard Not Starting or No .fluf File Steps
Verify the most compatible drivers are being used.
Need more help?
Steps To Change Windows Storage Drivers for NVMe Drives
Still not working?
Contact Sandisk Support
Include the logs and a screenshot of the firmware version for the update.
Sandisk Support article 52308. View the original article on Sandisk Support