Steps to Resolve Internal Drive Automatic Disk Check and Repair on Windows Startup

Problem

Scan and Repair is started automatically on Windows Startup.

Solution

This can happen when:

  • File system has errors that are not being fixed.
  • Drive has bad sectors or failing.
  • Windows is incorrectly marking the drive as dirty.
  • The computer is being powered off wrong.

Check Drive Status

  1. Open Command Prompt as Administrator.

  2. Press the Windows Key.
    Type cmd.
    Right-click Command Prompt.
    Click Run as administrator.

  3. Type fsutil dirty query X: (where X is the letter of the drive).

If Volume - X: is dirty is shown then the drive needs to be repaired.

Need more help?
Steps to Check Drives and Memory Cards for Errors or Failures on Windows and macOS


Run a Full Disk Check

  1. Open Command Prompt as Administrator.
    Type chkdsk X: /f /r (where X is the letter of the drive).

  2. View the prompted to schedule for the next restart.
    Type Y.

Restart the computer and let it scan completely.


Repair Windows System Files

  1. Open Command Prompt as Administrator.
    Type sfc /scannow.

  2. Type DISM /Online /Cleanup-Image /RestoreHealth.

  3. Restart computer.

Warranty Replacement

Replace if failed and in warranty.

Need more help?
Steps to Get a Sandisk Warranty Replacement for a Product, Power Supply, or USB Cable


Sandisk Support article 53754. View the original article on Sandisk Support