About Booting
A drive not booting after an OS installation is often caused by boot settings in the BIOS or by how the system was installed.
Check BIOS/UEFI Settings
The computer may try to start from the wrong drive.
- Restart the computer.
- Press the BIOS key when the system starts.
This is usually F1, F2, F12, or Delete. - Find the Boot Order or Boot Priority menu.
Make sure the OS installed drive is listed first. - Save and Restart
Toggle Boot Modes (UEFI / Legacy)
Motherboards may have multiple Boot Mode options.
UEFI (used by most modern systems)
Legacy / CSM (used by older systems)
If the wrong mode is selected, the computer may not see the drive.
- Restart the computer.
- Press the BIOS key when the system starts.
This is usually F1, F2, F12, or Delete. - Look for Boot Mode.
Try switching between UEFI or Legacy / CSM. - Save and Restart.
Fix the Boot Partition
Windows might place the boot files on a different drive if there are multiple drives in the system.
This can cause errors when starting.
- Turn off the computer.
- Disconnect all drives except the one that will hold the OS.
- Do a clean install of Windows on the drive.
- Reconnect the other drives after successful install and booting of the OS.
Sandisk Support article 53671. View the original article on Sandisk Support