Problem
It is not seen or working with the mobile phone or app after formatted on a computer.
Solution
About Format
- Storage on the charger must be exFAT.
- It must be formatted as Master Boot Record (MBR) when using Windows or macOS.
- It will not work on mobile phones if formatted with GUID/GPT.
Warning: This process erases all data on the drive. Back up your data before you continue.
Steps for macOS
Important:
Select Master Boot Record (MBR) as the Scheme on macOS.
Format the drive as exFAT on macOS with MBR.
Need more help?
Steps to Format a Drive for Use on Windows and macOS Using exFat
Steps for Windows
Important:
Select (MBR) Master Boot Record as the Primary Partition Style on Windows.
Disk Management
Format the drive as exFAT on Windows with MBR.
Need more help?
Steps to Format a Drive for Use on Windows and macOS Using exFat
DISKPART
Windows commandline diskpart can also be used.
Format the drive as exFAT on Windows with MBR
- Press the Windows Key.
Type: cmd
Right-click Command Prompt.
Select Run as Administrator. - Type diskpart.
Press Enter. - Type: list disk
Press Enter.
Find the disk number of the Charger Storage based on its size. (e.g., Disk 1 or Disk 2) - Type: select disk X
Replace X with the drive's number.
Press Enter. - Type: clean
Press Enter. - Type: convert mbr
Press Enter. - Type: create partition primary
Press Enter. - Type: format fs=exfat quick
Press Enter. - Type: assign
Press Enter.
Open File Explorer and make sure the Charger Storage drive is there. - Type: exit
Type: exit again.
Sandisk Support article 53718. View the original article on Sandisk Support