Problem
The host device or formatting of a memory card may show card is full or not accessible message.
This can be caused by:
- card is full and no more free space.
- hidden or cached files on the card. corrupted file system.
- bad sectors.
- wrong insert or eject steps.
- virus or malware.
- card is failed.
Solution
- Free up some space on the card by deleting some files.
- Check for hidden or cached files.
Need more help?
- Microsoft Article: View hidden files and folders in Windows
- Apple Article: Show hidden files
- Check the card for virus and malware.
- Make sure the card is not locked.
Need more help? - microSD adapters should not be used.
Use a card reader instead.
Need more help?
Learn About the Best Practices for Using Memory Cards - Power off and on the host with the card removed.
- Check the slot.
Ensure there is no debris.
Do not force the card into the slot if it is too tight. - Insert and remove the card a few times.
- Connect the card to a Windows or macOS computer.
- Check the camera, drone, host device user manual or vendor website.
Make sure the card is compatible with the host. - Recover data with RescuePro or third-party software if needed.
Need more help? - Format the card with a file system supported by the host.
Use the host to format the card again or use a Windows, macOS computer.
Need more help?- Quick Steps to Format an External, USB Flash Drive, and Memory Card on Windows and macOS
- Steps to Format and Reclaim Full Capacity of External, USB Flash Drives, and Memory Cards on Windows and macOS
- Steps to Format a USB Drive, microSD, and SD Memory Card on Android to FAT32 or exFAT
- Free Third-Party SD Association Software to Format SD/SDHC/SDXC/SDUC Cards to Full Capacity on Windows and macOS
- Get a Warranty Replacement for a failed card.
Need more help?
Steps to Get a Sandisk Warranty Replacement for a Product, Power Supply, or USB Cable
Sandisk Support article 52422. View the original article on Sandisk Support