Steps To Resolve Reset to Device RaidPort Messages in Windows Event Viewer

Problem

Reset to device, \Device\RaidPort, was issued is seen in Windows Event Viewer.
The storage driver timed out waiting for a response and had to reset the connection.
This may cause system freezes, application hangs, and BSOD.

Solution



Check For Drive Errors

Open Command Prompt.

Type chkdsk X: /scan (X being the affected drive letter)

Note:

Windows storage resets can be caused by failing or degraded drives.


Need more help?
Learn About Using Windows CHKDSK on an Internal SSD


Update Firmware and Drivers

Check and update:

  • Drive firmware.
  • Motherboard BIOS/UEFI.
  • Chipset drivers.
  • Storage controller drivers.

Need more help?


Disable Storage Power-saving Features

Set Power Plan to High Performance.

Need more help?


Check Physical Connections

  • Reseat the drive.
  • Make sure it is connected all the way and firmly.

Need more help?
Learn About the Solid State Drive M.2 Form Factor


Test for Overheating

Monitor temps with software.

  • SANDISK Dashboard
  • HWiNFO64
  • CrystalDiskInfo

Look for sustained temperatures above ~70°C.
Overheating storage devices can trigger timeout conditions.

Need more help?
Consequences of Using Solid State Drives Outside of Temperature Specifications


Check Drive Health

Use SANDISK Dashboard to check health.
Check for:

  • Reallocated sectors
  • Pending sectors
  • Critical warnings
  • Excessive temperatures
  • Increased error counts

Need more help?


Repair Windows System Files

  1. Open Command Prompt as Administrator.
    Type sfc /scannow.

  2. Type DISM /Online /Cleanup-Image /RestoreHealth.

  3. Restart computer.

Warranty Replacement

Warranty replace a failed or degraded drive.

Need more help?
Steps to Get a Sandisk Warranty Replacement for a Product, Power Supply, or USB Cable


Sandisk Support article 53746. View the original article on Sandisk Support