Problem
Windows or macOS reports that the drive is full and no more space.
The amount of data and files copied to the destination is larger than the source.
This can be caused by:
- Unsupported, unrecognized file system, or partition on the drive.
- File Storage (cluster and file allocation block size).
- Errors on the drive.
- Fraudulent product.
Solution
File System and Partition
Windows or macOS may not support the partition and file system.
Format and Reclaim the disk space on the drive.
Format the destination storage with the same file system as the source.
Need more help?
- Steps to Format and Reclaim Full Capacity of External, USB Flash Drives, and Memory Cards on Windows and macOS
- Pros and Cons of File Systems used with Memory Cards, USB Flash, Internal and External Drives
File Storage
Files are stored based on the drive cluster, allocation block size, and not the exact file size.
Small files will take up more space on the external drive when the allocation is larger than the internal drive.
Format the destination storage with the same file system as the source.
Need more help?
Learn About Capacity and File Size Differences Between Source and Destination Drives
Drive Errors
There may be errors on the drive.
Need more help?
How to Check External, USB Flash Drive, and Memory Cards for Errors or Failure with Windows Diagnostic Programs
Fake Product
Fraudulent products may have less storage capacity than advertised.
Only purchase from authorized Sandisk distributors, retail, and e-tailers.
Need more help?
Sandisk Safe Buying Guide
Sandisk Support article 53645. View the original article on Sandisk Support