Steps to Setup Ixpand Wireless Charger Sync for iOS and Android

About Bluetooth

Setup a smartphone using Bluetooth and Wi-Fi.


Note:

Unpair the phone with other Bluetooth devices for the best setup results.


Steps to Setup

  1. Make sure the phone has Bluetooth turned on.

  2. Connect the power plug to the Charger.
    Plug the other end into a wall outlet.

  3. Download the iXpand Charger app.


  4. Open the app.
    Read the End User License Agreement.
    Tap Continue.

  5. Tap Agree to share Analytics.
    Tap Do not agree to not share.

  6. Tap Allow all the time.

  7. Wait for the app to find the Charger.
    Tap Continue.
  8. Take a screenshot and write down the PIN.

  9. Tap Continue for Location Access.
    Tap Always Allow.

    Critical:

    Continuous backup WILL NOT work if Always Allow is NOT selected


  10. Tap Continue to Allow Contact Access.

  11. Tap Continue to Allow Notifications.

  12. Tap Yes for Would you like to connect to Your Home network?

    Note:

    No Home Network?
    The Charger will broadcast its own SSID.
    This will create a direct Wi-Fi connection with the phone.


  13. Select the right Wi-Fi network.
    Enter the password.
    Tap Join.
    Wait a few minutes for the join to finish.

  14. Tap SIGN UP or skip to Step #15.
    Tap CREATE NEW VAULT.
    Create a new Password.
    Confirm Password.
    Add Password hint.
    Tap CONFIRM.

  15. Tap Allow to Share Analytics.
    Tap Don't Allow to not share.

  16. Review the information screens.

  17. Tap All Done.

  18. Need more help?
    Ixpand Wireless Charger Sync User Manual


Sandisk Support article 47631. View the original article on Sandisk Support