About Storage
Storage on the Charger uses exFAT with Master Boot Record (MBR).
It will not be seen on mobile phones if formatted with GUID/GPT.
Data can be accessed from a Windows or macOS using a USB connection.
It can be moved to another storage location accessible by the computer.
Note:
A USB 2.0 Micro B cable is required. (not included).
Use an Apple Certified cable when connecting to a Mac.
Move Files
- Make sure the Charger storage is not 100% full (Zero KB available).
Data access from the computer may not be possible if there is no free space.
Free up some space to at least 95-98% using the phone by removing some files.
- Disconnect from the phone.
- Remove the power cable from the Charger.
- Insert the USB 2.0 Micro B cable into the Charger.
Connect the other end to the computer. - Check the computer.
- Windows: Mounted under This PC.
Open File Explorer to see data. - macOS: Mounted on the Desktop.
Open Finder to see data.
Need more help?
Resolve USB Flash, External Drive, and Memory Card Reader Not Detected by Windows or macOS Guided Assist - Windows: Mounted under This PC.
- There should be three folders unless a Login with Encrypted Vault was used.
Contacts, Photos, and Videos.
Skip to Step #8 if password protected encrypted data vault is used. - Move files from the Charger to another storage location accessible by the computer.
Need more help?
Steps to Backup, Copy, or Move Data Between Drives on Windows or macOS - Download and install SANDISK App to access the vault data.
The Charger will be seen as "Sandisk iXpand Flash Drive Luxe".
Need more help? - Access the password protected encrypted data in the vault.
Need more help?
SANDISK App Backup, Password, and Encryption User Guide Instructions for Windows and macOS
Sandisk Support article 53522. View the original article on Sandisk Support