About Performance
Important:
- Data on an encrypted or password protected drive cannot be recovered by Sandisk.
- macOS Encryption is not recommended on external drives that support encryption.
Use SANDISK App on supported drives. - Performance may decrease by 30% or more.
- FAT32, exFAT, NTFS, MS-DOS (FAT) are not supported for encryption on macOS.
- Need more help?
SANDISK App and Supported Drives
SANDISK App can be used to set a volume password (Lock/Unlock) a drive or Encrypt files and folders.
Need more help?
- SANDISK App Supported Products for Drive Lock, Unlock, Encrypt, Decrypt, Password Protection
- SANDISK App Backup, Password, and Encryption User Guide Instructions for Windows and macOS
Steps for Disk Utility
Warning: This process erases all data on the drive. Back up your data before you continue.
- Open Disk Utility.
Need more Help? - Select the drive.
Click Erase.
- Select APFS (Case-sensitive, Encrypted).
Click Erase.
- Enter Encryption Password, Verify Password and Password hint.
Click Choose.
Critical:
-
Data cannot be recovered if the password is forgotten.
-
Encrypting the drive is a slow process.
It can take 1 min per GB.
-
Steps for Finder
Note:
Encrypt is only shown when the drive is APFS.
Use Disk Utility steps and erase and format as APFS if not seen.
- Connect the drive to macOS.
- Open Finder.
- Right-click the drive.
Click Encrypt.
- Enter Encryption Password, Verify Password and Password hint.
Click Encrypt Disk.
Critical:
-
Data cannot be recovered if the password is forgotten.
-
Encrypting the drive is a slow process.
It can take 1 min per GB.
-
Sandisk Support article 7047. View the original article on Sandisk Support