WD_BLACK AN1500 NVMe SSD ADD-IN-CARD Not Autodetected When Replacing Previous PCIe Card In The Same PCIe Slot

Problem

WD_BLACK AN1500 NVMe SSD ADD-IN CARD is not autodetected when replacing WD_BLACK AN1500 NVMe SSD ADD-IN-CARD with new WD_BLACK AN1500 NVMe SSD ADD-IN-CARD in the same PCIe slot using Windows 10.


This is an issue caused by the fast boot function of Windows 10.
Quick boot will first record the information of each peripheral device.
The next time the system is booted, quick boot will confirm if it is the same device used last time.
It will treat the new WD_BLACK AN1500 NVMe SSD ADD-IN-CARD as the same card and will not trigger device rescan.

Solution

Start a scan for hardware changes.

  1. Click Start.

  2. Type devmgmt.msc in the search box.

  3. Press the Enter key.
    This will open Device Manager.

  4. Click the computer.

  5. Click Action.

  6. Click Scan for hardware changes.

Sandisk Support article 29477. View the original article on Sandisk Support