eMMC card Broken or Damaged?

Hello,

I have ultra Sandisk Memory Card 8 GB .When I am trying to format it under linux -Ubuntu using DIsk Utility I am getting the error.

=> Are you sure you want to format the drive?

This operation concerns the drive “7.9 GB SecureeDigital/SecureDigital Drive”(SL08G)

=> Error formattig drive

An error occurred while performing an operation on “7.9 GB SecureeDigital/SecureDigital Drive” (SL08G):The operation failed.

Detals :

Error Creating partition Table:helper exited with exit code 1:Error calling fsync(2) ob /dev/mmcblk0:input/output error

I am not sure If I have damged it or what?

Also when I try to run the below command :

export DISK=/dev/mmcblk0

sudo dd if=/dev/zero of=${DISK} bs=1M count=20

I get this error :

Checking that no-one is using this disk right now …

BLKRRPART: Input/output error

OK

Disk /dev/mmcblk0: 121008 cylinders, 4 heads, 16 sectors/track

read: Input/output error

sfdisk: read error on /dev/mmcblk0 - cannot read sector 0

/dev/mmcblk0: unrecognized partition table type Old situation:

No partitions found

New situation:

Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End MiB #blocks Id System

/dev/mmcblk0p1 * 1 12 12 12288 e W95 FAT16 (LBA)

/dev/mmcblk0p2 13 3780 3768 3858432 83 Linux

/dev/mmcblk0p3 0 - 0 0 0 Empty

/dev/mmcblk0p4 0 - 0 0 0 Empty

read: Input/output error

sfdisk: read error on /dev/mmcblk0 - cannot read sector 0 Re-reading the partition table …

BLKRRPART: Input/output error

If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).)

lsblk gives this :

lsblk shows :

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 298.1G 0 disk ├─sda1 8:1 0 290.2G 0 part / ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 8G 0 part [SWAP] sdb 8:16 1 499.4M 0 disk └─sdb1 8:17 1 498.4M 0 part sr0 11:0 1 1024M 0 rom mmcblk0 179:0 0 7.4G 0 di


PLease assit me in resolving this.What I have done wrong .Have I deleted any partition?How can I restore my card back.I dotn care about the data right now, I just want my emmc in original condition.
3 replies