Hello!
I have bought
- Two microsdexpress 256gb SDSQXFN-256G-GN4NN
- One SanDisk PRO-READER SD Express Dual Card SDDR-A451-GNPNN
to test the maximum sustained write speed of these cards. They’re specified at “Sequential Write Performance 650MB/s”. However, when I try to copy a single 16gb file with random data from an internal PCIe4 SSD to the sdcard (exfat, 128kb cluster size, empty) in Windows 11 Explorer, the data rate starts at around ~300MB/s, then quickly drops to a very constant 218MB/s:
I’ve tried this now with both cards on 4 windows11 machines, a linux machine, a linux machine with a direct PCI->RTS5261 chip (the same as used in the PRO-READER, just without the USB/PCI bridge).
I see that the card really gets quite warm while writing, but adding ridiculous amounts of airflow along the surfaces doesn’t change anything.
Reading doesn’t hit the advertised 880MB/s either, but it gets a little closer, and that tells me that the USB connection between CPU and cardreader isn’t the bottleneck:
I’ve contacted SanDisk support, and, to be frank, it’s either AI answers or they don’t have the attention span to tackle this ticket (Incident: 250605-000877). Thankfully someone called me back and said they had seen the video, then proceeded to ask questions answered in the video…
Trying to be constructive… has anybody seen SUSTAINED write speeds higher than 218MB/s while copying large files to the disk? Note, I’m not asking about synthetic disk benchmarks like CrystalDisk etc., I’m asking about the simple real-world case of storing files.
Thank you!