Mac OSX system report information:
USB 3.1 Bus:
Host Controller Driver: AppleT8132USBXHCI
Portable SSD:
Product ID: 0x55bb
Vendor ID: 0x0781 (SanDisk Corporation)
Version: 60.04
Serial Number: 32343531464C343034323639
Speed: Up to 480 Mb/s
Manufacturer: SanDisk
Location ID: 0x00100000 / 1
Current Available (mA): 500
Current Required (mA): 500
Extra Operating Current (mA): 0
Media:
Portable SSD:
Capacity: 1 TB (1,000,204,886,016 bytes)
Removable Media: No
BSD Name: disk4
Logical Unit: 0
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
USB Interface: 0
Volumes:
PortableSSD:
Capacity: 1 TB (1,000,202,788,864 bytes)
Free: 909.92 GB (909,924,892,672 bytes)
Writable: Yes
File System: ExFAT
BSD Name: disk4s1
Mount Point: /Volumes/PortableSSD
Content: Microsoft Basic Data
Volume UUID: 67ADE86A-712E-3921-A9E4-9932DDD65XXX
Test outputs:
macOS Disk Performance Test
/dev/disk4:
Device / Media Name: Portable SSDTesting cached reads…
Timing cached reads: 4096 MB in 0.28 seconds = 14606.67 MB/secTesting buffered disk reads…
Timing buffered disk reads: 1024 MB in 42.72 seconds = 23.97 MB/sec
Can I get more information on why performance is so poor. The package advertises 800MB/s?