SANDISK X300 512GB Reset to FACTORY CAPACITY

Hey guys.

need some help.

had some trouble with a WINDOWS 10 install to SSD.

there seems to be a problem after changing the OS from WINDOWS 10PRO to WINDOWS HOME since i didnt have a product KEY for the PRO VERSION.

there were some issues with DRIVE partitions and not being able to install.

currently, the 512GB X300 that i am using only shows 476GB CAPACITY after successfully installing WINDOWS 10 HOME.

there seems to be some hidden partition(s) that WINDOWS 10 Disk Management cannot see.

i am trying to reset the drive back to the original 512GB.

i have tried Command Prompt processes to format and clean the drives, but regardless of what i have tried, the drive will not reset back to 512GB.

i suspect these to be the SYSTEM and RECOVERY Partitions from WINDOWS 10 PRO installation.

i was told to try resetting the MBR. but not sure exactly how to do this.

i am willing to lose all data on this drive as this will be a totally clean install of WINDOWS 10.

there is nothing on the drive that i need to recover.

the goal is to get the drive back to the original 512GB capacity.

hope someone can help.

thanks!

4 replies