Sorry if this is long and about the bad spelling and grammar.
I wrote this as I and people I know have been have ongoing issues with hard drives. This would help people get to the cause of there computer problems faster.
Sorry to say but I have and 80% failure rate on my 20 hard drive scatter over my computers 8 computer. Most of the computers have two or three hard drives. Usually the addition drives are just for manual mirror of the main drive. So I can restore the image if the main drive fails.
Come with a hard drive surface test software. I have had a high failure rate with Western Digital Drives.
Also I have met a number of people with so called unstoppable virus problems. Where they have spend many hours:
-
Running virus checking and removal software.
-
Reinstalling Windows.
-
Finding Documents, Spreadsheet, Photos, Videos, Database etc become corrupt.
The people in the shops often tell them when they describe the problem and with the media attention on Viruses and Malware they believe.
Then I do a surface scan on their and we find bad sectors. I help them backup there drive. I advise them to get a warranty replacement.
If there was Windows and Mac based surface test software and instruction on how to use it with the manual then it would save people a lot of pain.
Also if you want to get fancy:
- a feature the identifies what files are using the bad sectors.
- a feature the tries to copy files partly in bad sectors off the sector. To a new location on the drive or a new drive.
- a feature that marks the sector as bad so that it does not get re used or if unused at the time of the scan does not get use in the first place.
Should have to modes c
- File System based surface test where it scans every file in the volume an check it can be read.
- Drive based surface test where it scans the drive sector by sector from beginning to end.
The above features use to be available through Norton Disk Doctor and it save many people much pain. But when Hard Drive technology changed the new owner who name no one can spell (LOL) never updated it 😦
I know some people at WD may think it is bad PR to tell people they have to scan there drive for surface errors regularly. But if you explain it like a car that you have to get your car check for problem regular. Then people will understand I am sure your PR department can write some thin nice.
Also the SMART technology in the drives does not count detect bad sectors. I have drives replace that have up to 50 bad sectors. But the SMART data still reported no problems with the drive. The fact that an attempt to read the sector failed should be enough to cause the SMART to register a smart error counter.
Now I know you guy a WD will say drives not detect bad sector and reallocate them to an unused part of the drive. But this is clearly not happening.
As me and my friends hard drives develop CRC errors on the drive when reading a file. Then when you run a file system based surface scan on the you discover one of the sectors use by the file reporting the CRC error is a bad sector and can not be read. The whole time SMART is reporting no errors and no sector relocations!
So times these will be files that were written to the drive when the drive as new and only read back on or twice.