Converting SanDisk Cruzer 16GB from Removable to Fixed Disk Mode

I have seen some novice users inquire on this forum about making several partitions on a SanDisk Cruzer flash drive. From what I understand, Windows will fail to create, let alone properly read, a multi-partition flash device so long as it is recognized as a removable device, as opposed to a fixed disk. The corresponding modes are determined by Windows by communication with the controller and the firmware, requiring a specific bit to be changed if I want it to masquerade as a fixed disk in Fixed Disk Mode, allowing me to add more than one partition. As far as I can tell, SanDisk does not provide a utility to change this. Some companies do, the primary example being Lexar. Does SanDisk have a similar utility? Please keep in mind I am not interested in a utility for this on the CompactFlash devices made by SanDisk; I am aware of them discontinuing this utility. I want to know how to do this specifically for a SanDisk Cruzer drive, with the following vendor and model ID’s: idVendor=0781, idProduct=5530 (Linux), USB\VID_0781&PID_5530 (Windows). It would be most appreciated if I got a semi-official response from SanDisk regarding this issue.

2 replies