System does not boot when the USB flash drive is connected.

When the SanDisk USB key is connected to the server, the server does not boot.

I have the same problem with 8GB Cruzer Edge and a 16GB Extreme USB 3.0 and it does not make a difference if I connect them on a USB 3.0 or a USB 2.0 slot.

All USB ports are enable on the BIOS.

Altering the boot order does not help.

Is there any special settings I need to chose to allow normal operation on the server with the USB key connected ?

Are SanDisk USB storage products compatible with main stream servers?

Thanks

11 replies