What different Ultra USB 3 and Ultra Flair USB 3?

Ultra USB 3 32GB - works perfectly with QuPac Digital Mixer A&H
Ultra Flair USB 3 64GB - Not recognized and can not to be formatted by this device.
What differents - flash memory controller, FAT parameters or firmware?
Is it possible to replace the firmware?

I already tried to format Ultra Flair USB 3 64GB using HBUSBDisk.exe - this does not solve the problem.

In addition the first stipulation from manufacturer (A&H) is - all the USB memory devices must be formatted by the Digital Mixer (QuPac).

All formatted by A&H mixer disks (which works well) are displayed on the computer (by R-STUDIO NETWORK) as FAT32.

==================================================

For example - 2TB Western Digital:

Sector Size - 512 Bytes

Partition Size - 1.82 TB

Drive Control:

Maximum Transfer - 64 KB

I/O Unit - 512 Bytes

Buffer Alignment - 4 Bytes

Physical Drive Geometry:

Cylinders - 243197

Tracks Per Cylinder - 255

Sectors Per Track - 63

Sector Size - 512 Bytes

Partition Layout Sector Size - 512 Bytes

Partition Properties:

Partition Type - FAT32 (LBA)

FAT Information:

FAT Bits - 32

Cluster Size - 32 KB

First Cluster Offset - 465.64 MB

Root Directory Cluster - 2

First FAT Offset - 16 KB

Size of One FAT Table - 232.85 MB

Number of FAT Copies - 2

==================================================

Even copying the FAT32 parameters from SanDisk Ultra 32 GB (that works well on Digital Mixer) does not help.

Differences detected - Firmware:

SanDisk Ultra 32GB (work well) has PMAP Firmware

SanDisk Flair 64GB (not work) has Firmware 1.00

What can be future actions?

1 reply